The Dyson Purifier Humidify+Cool PH2 De-NOx? purifies and hygienically humidifies the whole room*. It also cools you.** Hygienically removing 99.9% of bacteria in the water.† Removes odors and gases†† and continuously destroys formaldehyde.¶ Advanced air purification captures 50% more NO2.¶¶ The fully sealed, 3-stage filter system captures 99.97% of particles as small as 0.3 microns.§ The whole purifier, not just the filtration system, is fully sealed to HEPA H13 grade.§ Air Multiplier™ technology projects over 77 gallons per second of smooth, yet powerful airflow§§. Connect to the MyDyson™ app to control and monitor air quality from anywhere, or hands-free with compatible voice services.#

•	Advanced air purification automatically captures 50% more NO2¶¶
•	Hygienically removes 99.9% of bacteria in the water†
•	Fully sealed, 3-stage HEPA H13 grade filtration captures 99.97% of particles as small 0.3 microns§
•	Removes odors and gases†† and continuously destroys formaldehyde¶
•	Dyson Air Multiplier™ technology projects over 77 gallons per second of smooth, yet powerful airflow§§ to cool you in summer.**
•	Control and monitor air quality from anywhere using the MyDyson™ app, go or hands-free with compatible voice services#
•	Set schedules and receive personalized air quality reports via the MyDyson™ app#
•	Smooth oscillation up to 350° directs airflow around the room

*Tested for air projection (DTM801) and humidification (TM-002110).
**Fan, not air conditioning unit.
†Humidifier water tank sterilization system tested on S. aureus, E. coli, P. aeruginosa and B. subtilis. Water tank was inoculated with live bacteria. Samples taken of the humidification water after the first 87mL of flow were compared with initial inoculated water, showing 99.9% reduction in viable bacteria.
††Gas capture rates vary.
¶Third party full machine testing based on GB/T 18801-2022 formaldehyde cumulative clean mass testing with continuous injection until plateau of formaldehyde CADR is achieved. Results may vary in practice.
¶¶Tested to Dyson test method TM-003387. In a 3 cubic meter test chamber, at fan speed 10, at third-party test laboratory (Fraunhofer WKI), comparison against regular activated carbon performance.
§Particle challenge with DEHS oil specified in EN1822 within a chamber specified in ASTM F3150. Tested per ISO 29463.
§§Tested to DTM-801, in fan mode, at speed 10.
#Requires device to run app, Wi-Fi or mobile data, Bluetooth 4.0 support, and iOS version 10 or Android version 5 (or above). Standard data and messaging rates may apply. Refer to the MyDyson app for compatible voice services.